Käyttöohje Adler AD 1247 Kattila

Käyttöohje

27. The device is not designed to work with external schedulers or separate remote

control system.

28. Do not wash the base of the kettle directly in the water, just wipe with a dry cloth.

26. Do not use aggressive detergents to wash the kettle housing - they can damage the

kettle or remove the markings.

23. Never switch on kettle without water.

22. Never fill kettle above MAX level and below MIN level. It may cause damage of kettle.

21. Move the kettle only by holding it by handle..

29. Children aged 3 to 8 years old can enable and disable the device only when it is in its

normal position of use, they are supervised or instructed on the safe use and understand

the resulting risks. Children aged 3 to 8 years old can not connect device, operate, clean

or maintain.

lid. Do not open the lid during boiling in kettle or immediately after boiling, because steam

coming out of lid can cause burns.

24. Never use kettle without filter or with open cover (automatic shutdown will not work).

25. Descale your kettle regularly. Using kettle with heating element covered by scale may

cause damage.

USING THE ELECTRIC KETTLE

13. The kettle is an electrical device and it is not designed to hold water or other liquids. After boiling, the water must be immediately

pour into another bowl. The water in the kettle after boiling can not stay longer than 10 minutes. Before each use, fill the kettle with

fresh water above the minimum and below the maximum level.

6. The kettle can manually be switched off in any time by ON/OFF switch.

9. Regularly remove limestone sediment inside the kettle. Sediment may cause overheating of the kettle, shorten life cycle and cancel

guarantee. Use mixings available in household stores or apply citric acid.

4. After boiling water the kettle will automatically switch off.

11 When the water is heated to the appropriate temperature, device signals this with three beeps. If the kettle is not removed from the

base, after a few minutes a beep will be repeated.

BEFORE FIRST USE: Fill up the kettle with water, boil and pour. Repeat three times. To remove possible scent of manufactory, please

boil few times water.

7. Keep lid closed during boiling process. Or the kettle won't automatically switch off.

1 - plastic lid 2 - lid opening switch 3 - housing

8. After boiling, time demanded for the thermostat to be ready is 2 minutes. After this time kettle can be switched on again.

DESCRIPTION

3. Plug the kettle to the 220-240V ~50/60Hz mains, press ON/OFF switch. Indicator lamp will light.

Press the “A” key briefly, with the sound “di.”, it starts working.

10. Switching empty kettle, or with insufficient level of water, will cause automate switching off the kettle. Wait till cool down the kettle,

pour enough water and after few minutes switch the kettle on.

1. Fill the kettle with water. Make sure that heating plate is fully immersed in water.

5. Before taking the kettle out of the base make sure it is switched off.

12.The beep sound warns user when the device is not on the basis of, or is not put properly.

2. Place the appliance on the flat, even and heat resistant surface.

BASICAL OPERATION:

After the water boils, indicator turns off and the buzzer sends out a “di” sound at the same time.

SINGLE BOILING UP TO 100℃

4 - handle 5 - base 6 - anti-calc filter 7 - control panel

ADVANCED OPERATION:

Press “A” for 2 seconds, with the buzzer sends out “di” sound, “B” button indicator light is on, and the kettle is in keep warm mode, with red

LED light will switch on. The indicator light is still lit after water has finished the boiling and the kettle automatically turns in the keep warm

function for 2 hours. When the water temperature decreases to 85℃ the kettle starts to boil again to 100℃ and repeat the operation for 2

hours.

WATER BOILING 60℃ - 90℃ WITHOUT THE KEEP WARM FUNCTION

KEEP WARM FUNCTION 100℃

Press“B” key once / twice / thrice / the fourth time, then the indicator light is under 60℃ / 70℃ / 80℃ / 90℃ condition with green / blue /

yellow / purple LED light. This means that it will stop heating when the water temperature reaches 60℃ / 70℃ / 80℃ / 90℃

Press “A” key briefly, the buzzer will send out a “di” sound, the kettle is boiling now.

4

Arviointi

Lisää tästä ohjekirjasta

Ymmärrämme, että on mukavaa, että sinulla on paperikäyttöinen käyttöopas laitteellesi Adler AD 1247 Kattila. Voit aina ladata oppaan verkkosivuiltamme ja tulostaa sen itse. Jos haluat alkuperäisen käyttöoppaan, suosittelemme ottamaan yhteyttä osoitteeseen Adler. He saattavat pystyä toimittamaan alkuperäisen ohjekirjan. Etsitkö laitteen Adler AD 1247 Kattila käyttöopasta toisella kielellä? Valitse haluamasi kieli kotisivuiltamme ja etsi mallinumero nähdäksesi, onko sitä saatavilla.

Tekniset tiedot

Kaikki käsikirjat kohteelle Adler Kattilat
Lisää Kattilat käsikirjoja

Usein kysytyt kysymykset kohteesta Adler AD 1247 Kattila

Tukitiimimme etsii hyödyllisiä tuotetietoja ja vastaa yleisiin kysymyksiin. Jos huomaat yleisissä kysymyksissä virheen, kerro siitä meille yhteydenottolomakkeella.

Liittyvät tuotteet

Käyttöohje

Adler AD 1280 Kattila

Käyttöohje

Adler AD 1386 Kattila

Käyttöohje

Adler AD 1355 Kattila

Käyttöohje

Adler AD 1306 Kattila

Käyttöohje

Adler AD 1283C Kattila

Käyttöohje

Adler AD 1305 Kattila

Käyttöohje

Adler AD 1371 Kattila

Käyttöohje

Adler AD 1207 Kattila

Aiheeseen liittyvät luokat